Damp ink might cause the paper to stick together. Clean the paper rollers through the duplexer Gather the following materials:. Reattach the output tray. The Power light and the Resume light blink alternately In this error condition, the following light pattern displays on the product control panel:. Purchase replacement cartridges and other supplies from the HP Store or local retailers. Use a flashlight to view the mechanism inside the tray to make sure that nothing blocks the paper from engaging with the rollers. Remove and reattach the rear access door Remove the rear access door.
|Date Added:||13 December 2008|
|File Size:||26.5 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Use both hands to pull whole sheets of paper to avoid tearing them.
Blinking Lights on the HP Deskjet and Printers | HP® Customer Support
The Tri-color Cartridge Low-ink icon. Slide the paper width guide inward. Remove the stack of paper from the tray. Turn the door latch counter-clockwise, and then pull the door away from the product to remove it. The cover on the product might be open.
HP Deskjet Ink Cartridges |
Wait for the carriage to move. Asia Pacific and Oceania. Clear the paper jam through the duplexer Press the Power button to turn off the product. Load paper The product might be out of paper. Close the top cover on the printer If the cover on the product is open, close it. Choose from the following two methods to clear the paper jam through the rear access door or the duplexer.
Pulling jammed paper from the front of the product can cause damage to the print mechanism. Slide the paper guides outward. Pulling the paper out too quickly increases the chances of damaging the product. Follow these solutions in the order presented to resolve the issue. If the light continues to blink after several seconds, continue to the next solution.
Choose from the following two methods to clean the paper feed rollers through the rear access door or the duplexer.
Do not remove jammed paper at this stage. Please try again shortly.
Slide the cartridge at a slight upward angle into its slot, and then gently push it forward until it snaps into place. The Tri-color Cartridge Problem icon.
Damp ink might cause the paper to stick together. Wait until the warm-up period completes before you continue. The Power light is on and the Print Cartridge light blinks. The Power light blinks In this normal condition, the following light pattern displays on the product control panel:. Push down on the cartridge to release it, and then pull the cartridge toward you to remove it from its slot.
The product is turned off, 5552 there is an issue with the power source.
HP DeskJet 5552 Ink Cartridges – Genuine & Remanufactured
The 5525 lights might flash and the carriage might move. Print a self-test report Print a self-test report to make sure that the hardware functions correctly.
The Power light is on and the Resume light blinks. Choose from the following two methods to clean the paper rollers through the rear access door or the duplexer. Remove any loose sheets of paper from the input tray and the output tray.
Turn the printer off and then on again Follow these steps to turn the product off and then on again. Blinking lights The lights on the front of the HP product can be on, off, or blinking flashingdepending on the status of the product. Clean the paper rollers through the rear access door Follow these steps to remove the rear access door and then clean the paper rollers in the rear of the product.